Contents of the 359 kg UF Calibrated Plate Set
- Weight 25 kg x 10: diameter 450 mm / thickness 27 mm / red
- Weight 20 kg: diameter 450 mm / thickness 22,5 mm / blue
- Weight 15 kg: diameter 400 mm / thickness 22 mm / yellow
- Weight 10 kg: diameter 350 mm / thickness 22 mm / green
- Weight 5 kg: diameter 225 mm / thickness 21,5 mm / white
- Weight 2,5 kg: diameter 190 mm / thickness 16 mm / black
- Weight 1,25 kg: diameter 160 mm / thickness 12 mm / silver
- Weight 0,5 kg: diameter 134 mm / thickness 8 mm / silver
- Weight 0,25 kg: diameter 112 mm / thickness 6 mm / silver
- Total weight: 359 kg
- Tolerance: 10 g, checked against calibration weights
- Colours: compliant with IPF standards
- Manufacturing: sand cast iron, epoxy coating
The set that covers a competition bar
This set carries ten 25 kg plates. That is what separates it from the 259 kg set and it is all that matters once your working loads pass 250 kg on the bar.
At that level, total weight is no longer the limit, the number of available heavy plates is. Stacking 10s and 15s to reach a load four 25 kg plates would handle better wastes sleeve space and makes the bar harder to read.
A 10 gram tolerance
A standard plate can deviate by several hundred grams from its stated weight. On a bar loaded to 300 kg, the accumulated error is no longer trivial.
These plates are calibrated to within 10 grams, checked against calibration weights. Your numbers match reality, including the day you compare them to a competition platform.
An IPF colour code
Red for 25 kg, blue for 20, yellow for 15, green for 10, white for 5. The colours comply with IPF standards. You read a loaded bar at a glance, without counting.
Sand cast iron
These plates are made of cast iron using the sand casting technique. The process gives a microporous surface the epoxy grips far better than it would on smooth steel. The coating does not chip on the first knock.
The reduced thickness, 27 mm for a 25 kg plate, lets you load heavy without being limited by sleeve length. The 450 mm diameter matches regulation bar height.
Usage and safety tips
- These plates are cast iron, not rubber. Do not drop them from overhead, use bumper plates for weightlifting.
- Store the plates on a vertical rack rather than stacked on the floor, epoxy wears on contact.
- Always use collars, the reduced thickness leaves more play on the sleeve.
- With ten 25 kg plates, spread the storage so 250 kg is not concentrated on a single support.
Which calibrated plate set should you choose?
| Set |
Total weight |
For whom |
| 259 kg UF Calibrated Plate Set |
259 kg |
Demanding home gym, experienced lifter |
| 359 kg UF Calibrated Plate Set |
359 kg |
Powerlifting, club, competition loads |
Unique benefits of the 359 kg UF Set
- Ten 25 kg plates, the heavy load configuration.
- 10 g tolerance, your numbers match reality.
- IPF colours, instant reading of the bar and competition landmarks.
- 27 mm for a 25 kg plate, the sleeve never becomes the limiting factor.
Find the full range of our plates in the weights category.
