Technical specifications of the CS-1 Double Storage for Olympic Bars
- Weight: 3.22 kg
- Length: 25 cm
- Width: 11 cm
- Height: 7.6 cm
- Capacity: 2 Olympic bars stored vertically
- Cut-outs: 2 slots of 35 mm
- Protection: plastic lining top and bottom
- Safety: 2 cm front lip
- Mounting: recessed, on CS-1 range uprights
Two bars stored vertically, almost no floor space used
An Olympic bar leaning against a wall always ends up falling, rolling or getting in the way. This double storage puts them upright on one of your rack uprights, where they are in nobody's way.
In a home setup, floor space is usually what you lack most. Two bars stored vertically means a corner of the room becomes usable again.
Your bars protected, knurling included
Both contact areas, top and bottom, are plastic lined. Your bars never rest steel on steel. On a bar with aggressive knurling or a chrome bar, that is what prevents marks at the contact point.
The front edge has a 2 cm lip. A bar does not work its way out on its own, even if someone knocks the rack in passing.
Where to mount it on your rack
We recommend mounting it on the outside of the cage rather than the inside. You grab and return your bars without stepping into the rack, which matters when you go through several bars in the same session.
The recessed mounting avoids any protruding edge at hip height, a detail that counts on the main walkway around a cage.
Usage and safety tips
- Check that both fixings are tight before putting a bar in.
- Insert bars vertically, do not drop them into the slots.
- The cut-outs are sized for 35 mm sleeves, check your bar diameter before ordering.
- On a rack that is not floor anchored, spread the storage out so the cage is not unbalanced on one side.
Which CS-1 storage should you add to your cage?
| Storage |
What it holds |
| CS-1 Double Storage for Olympic Bars |
2 Olympic bars, vertically |
| CS-1 Modular Pro Weight Storage |
Olympic plates, as a pair of supports |
Unique benefits of the CS-1 Double Storage
- Two bars stored on the footprint of a single upright.
- Plastic contact top and bottom, your bars stay unmarked.
- 2 cm front lip, no bar works its way out.
- Recessed fixings, nothing protrudes on the walkway around the cage.
Frequently asked questions
What are the specifications of the CS-1 double bar storage?
3.22 kg, 25 cm long, 11 cm wide, 7.6 cm high, two 35 mm slots to store two Olympic bars vertically, plastic coating at the top and bottom, 2 cm front lip, recessed mountings on the CS-1 uprights.
Which bars can be stored in it?
Most standard-size Olympic bars, whose sleeves measure 35 mm. Check the diameter of your bars before buying.
Where should this storage be placed on the rack?
On the outside of the cage rather than inside, so you can take and put back the bars without stepping into the rack. On a rack that is not anchored to the floor, spread the storage units out so as not to unbalance the cage on one side.
Are the bars protected?
Yes, both contact areas are coated with plastic, the bars never rest steel against steel, and the 2 cm front lip prevents a bar from coming out if the rack is knocked.
