Bumper Plates - Set of 2 Bumper Weights from 5 kg to 25 kg

Sturdy bumper plates for all your workouts

Our bumper plates are designed to last and to withstand intensive training such as strength training, weightlifting and cross-training. Made from high-density virgin rubber, these bumper plates offer minimal bounce, which makes them ideal for protecting your floors and equipment.

±1% tolerance, hooked insert and virgin rubber, what makes the difference

±1% weight tolerance. Every plate is checked to within ±1% of its weight, i.e. 250 g at most on a 25 kg plate, versus up to ±5% on entry-level bumpers.

Hooked steel insert. Two welded anchor rods and a knurled surface are embedded in the rubber so the insert does not spin or come out of the plate, where a simple pressed-in ring eventually works loose.

Dual-hardness virgin rubber. Firmer at the edge to limit bounce, softer around the insert to absorb impact and keep it from tearing out after a drop. Denser than recycled rubber, it is thinner for the same weight and odourless.

Moulded weight and logo. The markings are part of the plate, they are neither painted nor screen-printed and do not wear off with drops.

Technical specifications

• Diameter: 450 mm (meets IWF standards)
• Centre hole: 50.5 mm, compatible with Olympic bars
• Insert: reinforced stainless steel for maximum durability
• Weight tolerance: +/- 1% to guarantee optimal accuracy
• Bounce: minimal for greater safety and less floor impact

Plate thickness by weight

Our bumper plates are available in different sizes, each with a thickness suited to optimising durability and handling:

• 5 kg: 26 mm
• 10 kg: 47 mm
• 15 kg: 60 mm
• 20 kg: 71 mm
• 25 kg: 81 mm

Available in black or in colour.

Black or IWF colours

The bumpers come in black or in IWF colours, 5 kg grey, 10 kg green, 15 kg yellow, 20 kg blue, 25 kg red, with the same 450 mm diameter across the range.

The 100 kg pack includes (2x 5 kg, 2x 10 kg, 2x 15 kg and 2x 20 kg, available in black or colour).

The 150 kg pack includes (2x 5 kg, 2x 10 kg, 2x 15 kg, 2x 20 kg and 2x 25 kg, available in black or colour).

Guaranteed performance and safety

Each bumper plate is factory-tested to withstand more than 12,000 drops from a height of 2.4 metres, guaranteeing exceptional longevity. Their slim design lets you load up to 220 kg onto a standard Olympic bar, while offering perfect stability during training.

An ideal choice for strength training and weightlifting

These bumper plates for strength training are perfect for athletes looking for reliable, durable equipment. Their intelligent design and high performance make them an essential choice for your strength-training or weightlifting sessions, whether in the gym or at home.

Find the full range of our plates in the weights category.

Our guides: weight plates buying guide.

Frequently asked questions

What is the difference between these bumper plates and recycled rubber plates?

UF bumpers are made of high density virgin rubber: they are odourless and thinner for the same weight, which lets you load more weight on the bar (26 mm for 5 kg, 81 mm for 25 kg). Their bounce is minimal and the insert is reinforced stainless steel to prevent any separation.

What is the weight tolerance of UF bumper plates?

The tolerance is plus or minus 1 percent, so 250 g at most on a 25 kg plate, whereas entry level models can reach plus or minus 5 percent. The weight markings are raised, moulded into the rubber, and do not wear off.

Can you drop the loaded bar with these bumpers?

Yes. Each plate is factory tested to withstand more than 12,000 drops from a height of 2.4 metres. The minimal bounce protects floors and equipment.

What diameter and bore do the bumper plates have?

All plates, from 5 to 25 kg, have a diameter of 450 mm in line with the IWF standard. The centre hole is 50.5 mm, compatible with Olympic bars.

Which bumper packs are available?

The plates are sold in pairs in 5, 10, 15, 20 or 25 kg, in black or in colour. The 100 kg pack includes 2 x 5, 2 x 10, 2 x 15 and 2 x 20 kg; the 150 kg pack adds 2 x 25 kg.