Technical specifications of the CS-1 76 cm uprights
Description:
- Height: 76 cm
- Heavy duty 11 gauge steel frame (3 mm)
- 75 x 75 mm uprights
- Laser-cut vertical numbering for easy J-cup adjustment
- 5 cm hole spacing with a 2.5 cm diameter
- Contents: 2 uprights
- Compatibility: CS-1 range accessories and uprights
Two short uprights to complete your CS-1 setup
Same steel, same section, same hole standard as the full height uprights. These 76 cm uprights are made for the lower sections of your setup.
Short format, precise purpose. Where a two metre upright would be bulky or pointless, these 76 cm give you an anchor point at a useful height, for an extension, an accessory mount or the lower part of a configuration.
CS-1 modularity in a compact format
The CS-1 range works like a construction set. Every element shares the 75 x 75 mm section and the 5 cm hole spacing, with a 2.5 cm hole diameter. A 76 cm upright therefore combines exactly like a 236 cm one and takes the same accessories.
That is what lets you grow a setup piece by piece, at the pace of your needs and your budget, instead of replacing everything.
Instant setting recall
The laser-cut vertical numbering lets you find your J-cup setting again from one session to the next without guessing. Both uprights line up identically without measuring anything.
Usage and safety tips
- Tighten the hardware to the recommended torque and re-tighten after the first sessions.
- Line both uprights up on the same hole number before loading.
- Check that the floor is level, a short upright amplifies the slightest seating defect.
Which CS-1 upright should you choose?
Three upright formats exist in the CS-1 range, all in the same 75 x 75 mm section and the same hole standard.
Unique benefits of the CS-1 76 cm uprights
- The format you miss when a full height upright would be too much.
- Same 3 mm steel and same section as the load bearing uprights.
- Laser-cut numbered holes, settings you can reproduce session after session.
- Adds to an existing setup without replacing anything.
Frequently asked questions
What are the specifications of the 76 cm CS-1 uprights?
Height 76 cm, section 75 x 75 mm, 11-gauge steel (3 mm), holes spaced 5 cm apart with a diameter of 2.5 cm, laser-cut vertical numbering. Compatible with the accessories and uprights of the CS-1 range.
What are short 76 cm uprights for?
The lower parts of a CS-1 setup: an extension, an accessory support or the lower part of a configuration, where a two-metre upright would be bulky or pointless. They combine exactly like a 236 cm upright and accept the same accessories.
Which upright formats exist in the CS-1 range?
Three formats with the same 75 x 75 mm section and the same hole standard: 2 uprights of 236 or 204 cm to enlarge or raise the cage, 2 uprights of 76 cm for the lower parts and extensions, and the compact 104 cm logo upright for structural reinforcement and finish.
What installation advice applies to these uprights?
Tighten the bolts to the recommended torque and re-tighten after the first sessions, align both uprights on the same numbered hole before loading, and check that the floor is level, as a short upright amplifies the slightest unevenness.
